135473-01 | Bently Nevada | Proximitor/Seismic Monitor Module
Genuine Bently Nevada 135473-01. Proximitor/Seismic Monitor Module. Factory-tested, 48h burn-in. 12-month warranty. Ships within 24h.
Technical Specifications
| 135473-01 | module is part of the Bently Nevada monitoring systems, designed for condition monitoring of rotating machinery. It provides real-time data on vibration levels, temperature, and other critical parameters to ensure optimal machinery health and performance. |
|---|---|
| Input Voltage: | 24 VDC |
| Output Signal: | 4-20 mA |
| Frequency Range: | 0-1000 Hz |
| Temperature Range: | -40°C to 85°C |
| Dimensions: | 100 mm x 50 mm x 25 mm |
| Weight: | 2 kg |
| Environmental Rating: | IP65 |
| Operating Temperature Range: | -40°C to +70°C |
| Multiple Input Channels: | Allows for simultaneous monitoring of various parameters. |
| Signal Type: | Supports vibration and other parameter inputs. |
| Output: | Provides both analog and digital outputs for seamless integration with control systems. |
| Communication Protocols: | Supports Ethernet, RS-232, and other communication protocols depending on system configuration. |
| Mounting Options: | Designed for easy installation in a variety of industrial environments. |
| Manufacturer | Bently Nevada |
| Model / SKU | 135473-01 |
Ships within 24 hours | 12-Month Warranty | Worldwide Delivery
Bently Nevada 135473-01 — Why Calibration and Installation Both Matter
If you maintain rotating machinery, you already know that vibration sensors are the foundation of your condition monitoring program. Every alarm trip, every maintenance work order, every shutdown decision starts with the signal from this device. When a sensor drifts out of calibration — which happens gradually over years of thermal cycling and vibration — the monitor rack still displays numbers. The operators still make decisions. But those decisions are based on wrong data.
The 135473-01 | Bently Nevada | Proximitor/Seismic Monitor Module is a genuine Bently Nevada sensor. Input Voltage:: 24 VDC; Output Signal:: 4-20 mA; Frequency Range:: 0-1000 Hz; Temperature Range:: -40°C to 85°C. Not an aftermarket equivalent manufactured to looser tolerances — a genuine Bently Nevada unit with the manufacturer calibration certificate and holographic label intact. We verify every unit on a calibrated test bench before shipping: scale factor, linearity, and gap voltage measured against the manufacturer specification. Units that deviate from specification are not shipped. A printed test report accompanies every order.
Installation best practices: For eddy-current probes, the target surface must be clean, smooth, conductive, and at least twice the probe tip diameter. Use a calibrated gap meter to set the correct gap voltage before tightening the lock nut. Verify the output voltage at the proximitor after installation — before returning the machine to service. A probe installed with incorrect gap reports vibration amplitudes that are either dangerously low (missed faults) or falsely high (unnecessary trips). If you are replacing a failed sensor, order a spare at the same time. The cost of one spare sensor is negligible compared to one unplanned outage on a critical machine. Genuine Bently Nevada. 12-month warranty. Ships within 24 hours from Shenzhen.
Compatible Parts — Same System
These modules share the same system family as the 135473-01. Commonly ordered together for complete rack builds or spare parts kits.
Related Products
