330101-00-22-10-02-05 | Bently Nevada | 3300 XL 8 mm Proximity Probes
Genuine Bently Nevada 330101-00-22-10-02-05. Proximity Probe. Factory-tested, 48h burn-in. 12-month warranty. Ships within 24h.
Technical Specifications
| Manufacturer | Bently Nevada |
|---|---|
| Product Number | 330101-00-22-10-02-05 |
| Product Type | 3300 XL 8 mm Proximity Probes |
| Made in | U.S.A. |
| Specifications | : |
| Model | 3300 XL 8 mm Probe, 3/8-24 UNF thread, without armor |
| Unthreaded Length | 00 = 0.0 in |
| Overall Case Length | 22 = 2.2 in |
| Total Length | 10 = 1.0 meter (3.3 feet) |
| Connector and Cable Type | 02 = Miniature coaxial ClickLoc™ connector, standard cable |
| Agency Approval | 05 = CSA, ATEX, IECEx Approvals |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Operating and Storage Temperature | -51 °C to +177 °C (-60 °F to +351 °F) |
| Weight | 0.323 kg |
| Shipping Weight | 1.3 kg |
| Model / SKU | 330101-00-22-10-02-05 |
Ships within 24 hours | 12-Month Warranty | Worldwide Delivery
Bently Nevada 330101-00-22-10-02-05 — Why Calibration and Installation Both Matter
If you maintain rotating machinery, you already know that vibration sensors are the foundation of your condition monitoring program. Every alarm trip, every maintenance work order, every shutdown decision starts with the signal from this device. When a sensor drifts out of calibration — which happens gradually over years of thermal cycling and vibration — the monitor rack still displays numbers. The operators still make decisions. But those decisions are based on wrong data.
The 330101-00-22-10-02-05 | Bently Nevada | 3300 XL 8 mm Proximity Probes is a genuine Bently Nevada sensor. Product Number: 330101-00-22-10-02-05; Product Type: 3300 XL 8 mm Proximity Probes; Made in: U.S.A.; Specifications: :. Not an aftermarket equivalent manufactured to looser tolerances — a genuine Bently Nevada unit with the manufacturer calibration certificate and holographic label intact. We verify every unit on a calibrated test bench before shipping: scale factor, linearity, and gap voltage measured against the manufacturer specification. Units that deviate from specification are not shipped. A printed test report accompanies every order.
Installation best practices: For eddy-current probes, the target surface must be clean, smooth, conductive, and at least twice the probe tip diameter. Use a calibrated gap meter to set the correct gap voltage before tightening the lock nut. Verify the output voltage at the proximitor after installation — before returning the machine to service. A probe installed with incorrect gap reports vibration amplitudes that are either dangerously low (missed faults) or falsely high (unnecessary trips). If you are replacing a failed sensor, order a spare at the same time. The cost of one spare sensor is negligible compared to one unplanned outage on a critical machine. Genuine Bently Nevada. 12-month warranty. Ships within 24 hours from Shenzhen.
Compatible Parts — Same System
These modules share the same system family as the 330101-00-22-10-02-05. Commonly ordered together for complete rack builds or spare parts kits.
Related Products
