330180-12-00 | Bently Nevada | 3300 XL Proximitor Sensor
The Bently Nevada 330180-12-00 is a proximity sensor for Bently Nevada platforms. Product Type: 3300 XL Proximitor Sensor | Made in: U.S.A | Total Length and Mounting Option: 12 = 1.0 metre (3.3 feet) system length, no mounting hardware. Factory-sealed, live-rack tested, 48-hour burn-in. 12-month warranty. Ships within 24h.
Technical Specifications
| Manufacturer | Bently Nevada |
|---|---|
| Product No. | 330180-12-00 |
| Product Type | 3300 XL Proximitor Sensor |
| Made in | U.S.A |
| Total Length and Mounting Option | 12 = 1.0 metre (3.3 feet) system length, no mounting hardware |
| Agency Approval Option | 00 = Not required |
| Input | Accepts one non-contacting 3300-series 5 mm, 3300 8 mm, or 3300 XL 8 mm Proximity Probe and Extension Cable |
| Material | A308 Aluminum |
| Operating Temperature | -51 °C to +100 °C (-60 °F to +212 °F) |
| Storage Temperature | -51 °C to +105 °C (-60 °F to +221 °F) |
| Relative Humidity | Less than 3% change in Average Scale Factor (ASF) when tested in 93% humidity according to IEC standard 68-2-3 for up to 56 days |
| Weight | 0.246 kg |
| Shipping Weight | 1.3 kg |
| Model / SKU | 330180-12-00 |
Ships within 24 hours | 12-Month Warranty | Worldwide Delivery
The Bently Nevada 330180-12-00 is a precision sensor that converts physical motion into electrical signals for machinery protection. Sensor accuracy is the foundation of every control decision — from alarm trips to emergency shutdowns. Product No.: 330180-12-00. Product Type: 3300 XL Proximitor Sensor. Made in: U.S.A.
We verify every sensor on a calibrated bench: scale factor, linearity, and gap voltage measured against manufacturer specifications. Units that deviate are not shipped. Printed test report with serial number and measured values included. Genuine Bently Nevada. 12-month warranty. Ships within 24h.
What should I check before installation?
Inspect the target surface for pitting or runout. For eddy-current probes, the target must be clean and at least 2x the probe tip diameter. Verify bracket rigidity. Set gap voltage with a meter before tightening. Verify output at the proximitor after installation.
How do I verify compatibility?
Match the full part number on your existing sensor label. {vendor} encodes probe diameter, thread type, cable length, and connector style in the part number. A photo of your existing label allows our engineers to confirm within 4 hours.
Genuine vs. aftermarket — what is the difference?
Genuine {vendor} sensors use proprietary coil winding, calibrated magnetic materials, and individual sensitivity measurement. Aftermarket clones can deviate 15-30% from specification — enough to miss a fault or false-trip a machine.
Compatible Parts — Same System
These modules share the same system family as the 330180-12-00. Commonly ordered together for complete rack builds or spare parts kits.
Related Products
