9200-06-05-05-00 | Bently Nevada | Velocity Seismoprobe
The Bently Nevada 9200-06-05-05-00 is a velocity seismoprobe for Bently Nevada platforms. Product Number: 9200-06-05-05-00 | Product Type: Two-Wire Transducer | Made in: U.S.A. Factory-sealed, live-rack tested, 48-hour burn-in. 12-month warranty. Ships within 24h.
Technical Specifications
| 9200-06-05-05-00 | is a two-wire transducer designed for industrial machinery monitoring applications. Manufactured in the USA, it is customizable with various mounting, frequency, and connector options, making it suitable for diverse industrial environments. The product can also be provided with a Certificate of Origin (COO). |
|---|---|
| Manufacturer | Bently Nevada |
| Product Number | 9200-06-05-05-00 |
| Product Type | Two-Wire Transducer |
| Made in | U.S.A |
| Connector Option | 05=Terminal block top mount (no |
| Mounting Base Option | 05=No base; 1/2-20 UNF-3A stud |
| Agency Approval Option | 00 = No approvals required |
| Case and Adapter Material | Anodized aluminum A204 |
| Height | 102 mm (4 in) typical (depends on connector option) |
| Diameter | 41 mm (1.6 in) typical |
| Shipping Weight | 2 kg |
| Model / SKU | 9200-06-05-05-00 |
Ships within 24 hours | 12-Month Warranty | Worldwide Delivery
The Bently Nevada 9200-06-05-05-00 is a precision sensor that converts physical motion into electrical signals for machinery protection. Sensor accuracy is the foundation of every control decision — from alarm trips to emergency shutdowns. Product Number: 9200-06-05-05-00. Product Type: Two-Wire Transducer. Made in: U.S.A.
We verify every sensor on a calibrated bench: scale factor, linearity, and gap voltage measured against manufacturer specifications. Units that deviate are not shipped. Printed test report with serial number and measured values included. Genuine Bently Nevada. 12-month warranty. Ships within 24h.
How do I verify compatibility?
Match the full part number on your existing sensor label. {vendor} encodes probe diameter, thread type, cable length, and connector style in the part number. A photo of your existing label allows our engineers to confirm within 4 hours.
What should I check before installation?
Inspect the target surface for pitting or runout. For eddy-current probes, the target must be clean and at least 2x the probe tip diameter. Verify bracket rigidity. Set gap voltage with a meter before tightening. Verify output at the proximitor after installation.
Genuine vs. aftermarket — what is the difference?
Genuine {vendor} sensors use proprietary coil winding, calibrated magnetic materials, and individual sensitivity measurement. Aftermarket clones can deviate 15-30% from specification — enough to miss a fault or false-trip a machine.
Compatible Parts — Same System
These modules share the same system family as the 9200-06-05-05-00. Commonly ordered together for complete rack builds or spare parts kits.
Related Products
