Allen Bradley 1442-DR-5850 Eddy Current Probe Systems
The Allen-Bradley 1442-DR-5850 is a eddy current probe systems for Allen-Bradley platforms. Abnormal Probe/Sensor Output Voltage: -0.6V DC (probe/sensor OPEN or SHORT) | Maximum Current Consumption: -15 mA (with a 10 kΩ load) | Output Noise: 20 mV peak-to-peak + power supply noise. Factory-sealed, live-rack tested, 48-hour burn-in. 12-month warranty. Ships within 24 hours.
Technical Specifications
| Standard Calibration Material | AISI 4140 (JIS SCM440) steel flat surface |
|---|---|
| Maximum Output Voltage | -23V DC |
| Abnormal Probe/Sensor Output Voltage | -0.6V DC (probe/sensor OPEN or SHORT) |
| Maximum Current Consumption | -15 mA (with a 10 kΩ load) |
| Output Noise | 20 mV peak-to-peak + power supply noise |
| Cable Diameter | Approximately 2.7 mm or 3.6 mm (0.11 in. or 0.14 in.) |
| Connector Diameter | Approximately 7.1 mm (0.28 in.) |
| Armored Connector Diameter | Approximately 5.8 mm (0.23 in.) |
| System Cable Length | 5 m or 9 m (16.40 ft or 29.53 ft) nominal |
| Probe Integral Cable Variance | +30% / -0% |
| Extension Cable Variance | +20% / -0% |
| Power Supply | -24V DC |
| Driver Insulation Resistance | ≥ 100 MΩ @ 500V DC between terminals and mounting plate |
| Terminal Block | Spring lock terminal |
| Isolation Voltage (Driver) | 50V (continuous), Basic Insulation Type, terminals to mounting plate, Type tested at 500V AC for 60 s |
| Wiring Category | 2 - on signal ports |
| Wire Size (Driver) | 0.75…1.25 mm² (18…16 AWG) shielded stranded-copper wire rated at 90°C (194°F) or greater, 1.2 mm (3/64 in.) insulation max |
| Driver Mass | Approximately 200 g (7.0 oz.) |
| Manufacturer | Allen-Bradley |
| Model / SKU | 1442-DR-5850 |
Ships within 24 hours | 12-Month Warranty | Worldwide Delivery
Sensor Linearity — Why It Matters
A Allen-Bradley 1442-DR-5850 has a specified linear range — the gap distance over which output voltage changes proportionally to target displacement. Outside this range, the output saturates or becomes nonlinear. A probe installed with incorrect gap (too close or too far) will report incorrect vibration amplitudes. We verify linearity on every sensor we ship: calibrated target, known gap steps, measured output. If the linearity curve deviates from specification, we do not ship. Printed test report included.
Genuine Allen-Bradley. Factory-sealed. 48-hour burn-in. 12-month warranty. Ships within 24 hours.
Compatible Parts — Same System
These modules share the same system family as the 1442-DR-5850. Commonly ordered together for complete rack builds or spare parts kits.
Related Products
