Bently Nevada 170133-090-00 Proximitor Sensor
The Bently Nevada 170133-090-00 is a proximitor sensor for Bently Nevada platforms. Probe: Typically uses a 3300 series probe, either 5mm or 8mm in diameter. | System Length: 9 meters. | Scale Factor: 200 mV/mil (7.87 mV/µm).. Factory-sealed, live-rack tested, 48-hour burn-in. 12-month warranty. Ships within 24h.
Technical Specifications
| 170133-090-00 | is a non-contact device that measures the proximity of moving surfaces. It is crucial for monitoring machinery health and detecting potential failures in rotating equipment. |
|---|---|
| System Compatibility | Compatible with the 1701 FieldMonitor. |
| Probe | Typically uses a 3300 series probe, either 5mm or 8mm in diameter. |
| System Length | 9 meters. |
| Scale Factor | 200 mV/mil (7.87 mV/µm). |
| Temperature Coefficient | Ta = 70°C. |
| Supply Voltage | Operates with a 24VDC supply voltage. |
| Dimensions | 155 x 136 x 119 mm. |
| Weight | 280g. |
| Manufacturer | Bently Nevada |
| Model / SKU | 170133-090-00 |
Ships within 24 hours | 12-Month Warranty | Worldwide Delivery
The Bently Nevada 170133-090-00 is a precision sensor that converts physical motion into electrical signals for machinery protection. Sensor accuracy is the foundation of every control decision — from alarm trips to emergency shutdowns. System Compatibility: Compatible with the 1701 FieldMonitor.. Probe: Typically uses a 3300 series probe, either 5mm or 8mm in diameter.. System Length: 9 meters..
We verify every sensor on a calibrated bench: scale factor, linearity, and gap voltage measured against manufacturer specifications. Units that deviate are not shipped. Printed test report with serial number and measured values included. Genuine Bently Nevada. 12-month warranty. Ships within 24h.
What should I check before installation?
Inspect the target surface for pitting or runout. For eddy-current probes, the target must be clean and at least 2x the probe tip diameter. Verify bracket rigidity. Set gap voltage with a meter before tightening. Verify output at the proximitor after installation.
How do I verify compatibility?
Match the full part number on your existing sensor label. {vendor} encodes probe diameter, thread type, cable length, and connector style in the part number. A photo of your existing label allows our engineers to confirm within 4 hours.
Genuine vs. aftermarket — what is the difference?
Genuine {vendor} sensors use proprietary coil winding, calibrated magnetic materials, and individual sensitivity measurement. Aftermarket clones can deviate 15-30% from specification — enough to miss a fault or false-trip a machine.
Compatible Parts — Same System
These modules share the same system family as the 170133-090-00. Commonly ordered together for complete rack builds or spare parts kits.
Related Products
