Bently Nevada 200355-12-00-00 Seismic Transducer
Genuine Bently Nevada 200355-12-00-00. Seismic Transducer. Factory-tested, 48h burn-in. 12-month warranty. Ships within 24h.
Technical Specifications
| Product Type: | Seismic Transducer |
|---|---|
| Manufacturer: | Bently Nevada |
| Application: | Used for monitoring machinery vibrations in industrial settings |
| Sensitivity: | 100 mV/g ±5% |
| Frequency Range: | 12 to 600,000 cpm (0.2 to 10,000 Hz) |
| Measurement Range: | ±50 g |
| Operating Temperature Range: | -65°F to +250°F (-54°C to +121°C) |
| Enclosure Rating: | IP68 (dust-tight and waterproof) |
| Shock Survivability: | Up to 5,000 g peak |
| Output Bias Voltage: | 8 to 12 VDC |
| Excitation Voltage: | 18 to 28 VDC |
| Constant Current Excitation: | 2 to 20 mA |
| Settling Time: | ≤ 5.0 seconds |
| Output Impedance: | < 100 ohms |
| Discharge Time Constant: | ≥ 0.8 seconds |
| Electrical Isolation: | 108 ohms |
| Manufacturer | Bently Nevada |
| Model / SKU | 200355-12-00-00 |
Ships within 24 hours | 12-Month Warranty | Worldwide Delivery
Bently Nevada 200355-12-00-00 — Why Calibration and Installation Both Matter
If you maintain rotating machinery, vibration sensors are the foundation of your condition monitoring program. Every alarm, every work order, every shutdown decision starts with the signal from this device. When a sensor drifts — which happens gradually over years — the monitor still displays numbers, but those numbers are wrong. Wrong data leads to wrong decisions: missed faults or unnecessary trips.
The Bently Nevada 200355-12-00-00 Seismic Transducer is a genuine Bently Nevada sensor. Product Type:: Seismic Transducer; Manufacturer:: Bently Nevada; Application:: Used for monitoring machinery vibrations in industrial settings; Sensitivity:: 100 mV/g ±5%. We verify every unit on a calibrated test bench: scale factor, linearity, and gap voltage measured against the manufacturer spec. Units that deviate are not shipped. Printed test report included with every order.
Installation: Target surface must be clean, smooth, conductive, and 2x the probe tip diameter. Set gap voltage with a meter before tightening. Verify output after installation. If replacing a failed sensor, order a spare — the cost is negligible compared to one unplanned outage. 12-month warranty. Ships within 24 hours from Shenzhen.
Compatible Parts — Same System
These modules share the same system family as the 200355-12-00-00. Commonly ordered together for complete rack builds or spare parts kits.
Related Products
