Bently Nevada 330100-50-00 Proximitor Sensor Brand New
The Bently Nevada 330100-50-00 is a proximitor sensor for Bently Nevada platforms. 3300 XL Proximitor Sensor: Processes the probe’s output and provides relevant measurements, featuring improvements over previous designs. | Physical Packaging: Suitable for high-density DIN-rail installations or traditional panel configurations. | RFI/EMI Immunity: Highly immune to radio frequency interference, suitable for fiberglass housings without adverse effects from nearby radio signals.. Factory-sealed, live-rack tested, 48-hour burn-in. 12-month warranty. Ships within 24 hours.
Technical Specifications
| 3300 XL 8 mm Probe | This probe measures the distance between the probe tip and a conductive surface, providing output voltage proportional to this distance for capturing static (position) and dynamic (vibration) values. |
|---|---|
| 3300 XL Extension Cable | Connects the probe to the proximitor sensor. |
| 3300 XL Proximitor Sensor | Processes the probe’s output and provides relevant measurements, featuring improvements over previous designs. |
| Physical Packaging | Suitable for high-density DIN-rail installations or traditional panel configurations. |
| RFI/EMI Immunity | Highly immune to radio frequency interference, suitable for fiberglass housings without adverse effects from nearby radio signals. |
| European CE Mark Approval | Improved RFI/EMI immunity satisfies European CE mark approvals without requiring special shielding. |
| SpringLoc Terminal Strips | Facilitate faster and more robust field wiring connections. |
| Nominal Probe | Assumes operation between +18°C and +27°C (+64°F to +80°F) with a -24 Vdc power supply, 10 kΩ load, and appropriate mounting arrangement. |
| Operating Temperature | -51°C to +100°C (-60°F to +212°F). |
| Storage Temperature | -51°C to +100°C (-60°F to +212°F). |
| Manufacturer | Bently Nevada |
| Model / SKU | 330100-50-00 |
Ships within 24 hours | 12-Month Warranty | Worldwide Delivery
Getting Accurate Measurements — The Sensor Is Only Half the Story
A Bently Nevada 330100-50-00 can be manufactured to micron-level precision, but if it is installed on a surface with pitting, rust, or mechanical runout exceeding the probe tip diameter, the output signal will be noise — not data. We see this most often on older machines where the target area has degraded over years of service.
Before ordering a replacement sensor, inspect the target surface. A clean, smooth, conductive target area (at least 2x the probe tip diameter) is essential for eddy-current probes. For velocity sensors and accelerometers, verify the mounting surface is flat, clean, and free of paint layers that can act as a mechanical filter and attenuate high-frequency content.
This Bently Nevada 330100-50-00 is a genuine unit — not aftermarket. It ships with the manufacturer calibration data sheet showing the exact sensitivity, linear range, and frequency response measured at the factory. We also perform a secondary verification on our test bench before shipping. Functional test report included. 48-hour burn-in. 12-month warranty. Ships within 24 hours from Shenzhen.
Compatible Parts — Same System
These modules share the same system family as the 330100-50-00. Commonly ordered together for complete rack builds or spare parts kits.
Related Products
