Bently Nevada 330103-00-12-10-02-00 3300 XL 8mm Proximity Probe
Automation does not wait. The Bently Nevada 330103-00-12-10-02-00 is a 3300 xl 8mm proximity probe in our Shenzhen warehouse right now. Product Type: 3300 XL 8 mm Proximity Probes | Made in: U.S.A | Certificate of Origin: Available upon request. Verified before packing. 12-month warranty.
Technical Specifications
| Manufacturer | Bently Nevada |
|---|---|
| Product No. | 330103-05-12-10-02-00 |
| Product Type | 3300 XL 8 mm Proximity Probes |
| Made in | U.S.A |
| Certificate of Origin | Available upon request |
| Unthreaded Length Option | 00=0 mm |
| Overall Case Length Option | 12 = 120 mm |
| Total Length Option | 10 = 1.0 metre (3.3 feet) |
| Connector and Cable-Type Option | 02 = Miniature coaxial ClickLoc™ connector, standard cable |
| Agency Approval Option | 00 = Not required |
| Probe Pressure | Designed to seal differential pressure between the probe tip and case with a Viton® O-ring; not pressure tested prior to shipment. |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Shipping Weight | 2 kg |
| Model / SKU | 330103-00-12-10-02-00 |
Ships within 24 hours | 12-Month Warranty | Worldwide Delivery
Understanding the Bently Nevada 330103-00-12-10-02-00
If you maintain Bently Nevada systems, you know that not all replacement parts are created equal. The 330103-00-12-10-02-00 is a 3300 xl 8mm proximity probe engineered specifically for Bently Nevada automation platforms. The aftermarket is flooded with modules that look identical on the outside but use inferior components internally. manufacturer: Bently Nevada; product no.: 330103-05-12-10-02-00; product type: 3300 XL 8 mm Proximity Probes; made in: U.S.A. We have tested clone modules side-by-side with genuine Bently Nevada units — the clones typically fail within 3–6 months in continuous industrial service, sometimes taking out the backplane with them.
Every 330103-00-12-10-02-00 we sell is 100% genuine Bently Nevada, with the manufacturer serial number and holographic label intact. We source from authorized distribution channels and decommissioned system tear-downs with full traceability documentation.
Before inserting this module, power down the chassis completely. Bently Nevada modules are generally not hot-swappable. Verify backplane voltage with a calibrated multimeter before insertion. After installation, power up and verify the status LED shows normal operation before returning the system to service. Run the manufacturer diagnostic routine if available.
Compatible Parts — Same System
These modules share the same system family as the 330103-00-12-10-02-00. Commonly ordered together for complete rack builds or spare parts kits.
Related Products
