Bently Nevada | 330780-X1-05 | 3300 XL 11 mm Proximitor Sensor
Genuine Bently Nevada 330780-X1-05. Proximity Sensor. Factory-tested, 48h burn-in. 12-month warranty. Ships within 24h.
Technical Specifications
| 330780-X1-05 | Proximity Transducer System by Bently Nevada is designed for precise measurement of shaft displacement and vibration in industrial machinery, including turbines, compressors, and motors. Its compact, high-sensitivity design allows for easy installation in high-density environments. |
|---|---|
| Output | 3.94 V/mm (100 mV/mil) |
| Linear Range | Extended range for accurate measurements across various applications |
| Form Factor | Thin profile for DIN-rail or panel mounting in high-density setups |
| Temperature Range | Operates effectively from -40°C to 85°C |
| RFI/EMI Immunity | Enhanced resistance to radio frequency and electromagnetic interference |
| Terminal Strips | SpringLoc terminal strips allow for fast and secure field wiring connections |
| High Sensitivity | Offers precise, non-contact displacement measurement |
| Compact Design | Suitable for versatile mounting configurations |
| Enhanced Immunity | Reliable performance in areas with high electromagnetic and radio frequency interference |
| Ease of Installation | Quick and stable connections with SpringLoc terminal |
| Manufacturer | Bently Nevada |
| Model / SKU | 330780-X1-05 |
Ships within 24 hours | 12-Month Warranty | Worldwide Delivery
Bently Nevada 330780-X1-05 — Why Calibration and Installation Both Matter
If you maintain rotating machinery, you already know that vibration sensors are the foundation of your condition monitoring program. Every alarm trip, every maintenance work order, every shutdown decision starts with the signal from this device. When a sensor drifts out of calibration — which happens gradually over years of thermal cycling and vibration — the monitor rack still displays numbers. The operators still make decisions. But those decisions are based on wrong data.
The Bently Nevada | 330780-X1-05 | 3300 XL 11 mm Proximitor Sensor is a genuine Bently Nevada sensor. Output: 3.94 V/mm (100 mV/mil); Linear Range: Extended range for accurate measurements across various applications; Form Factor: Thin profile for DIN-rail or panel mounting in high-density setups; Temperature Range: Operates effectively from -40°C to 85°C. Not an aftermarket equivalent manufactured to looser tolerances — a genuine Bently Nevada unit with the manufacturer calibration certificate and holographic label intact. We verify every unit on a calibrated test bench before shipping: scale factor, linearity, and gap voltage measured against the manufacturer specification. Units that deviate from specification are not shipped. A printed test report accompanies every order.
Installation best practices: For eddy-current probes, the target surface must be clean, smooth, conductive, and at least twice the probe tip diameter. Use a calibrated gap meter to set the correct gap voltage before tightening the lock nut. Verify the output voltage at the proximitor after installation — before returning the machine to service. A probe installed with incorrect gap reports vibration amplitudes that are either dangerously low (missed faults) or falsely high (unnecessary trips). If you are replacing a failed sensor, order a spare at the same time. The cost of one spare sensor is negligible compared to one unplanned outage on a critical machine. Genuine Bently Nevada. 12-month warranty. Ships within 24 hours from Shenzhen.
Compatible Parts — Same System
These modules share the same system family as the 330780-X1-05. Commonly ordered together for complete rack builds or spare parts kits.
Related Products
