Bently Nevada 330908-00-18-10-02-05 Proximity Probe
Genuine Bently Nevada 330908-00-18-10-02-05. Proximity Probe. Factory-tested, 48h burn-in. 12-month warranty. Ships within 24h.
Technical Specifications
| 330908-00-18-10-02-05 | Proximity Probe is a high-precision, non-contact measurement device, designed for monitoring the dynamic performance of machinery in challenging industrial settings. Its robust design ensures reliable operation even in harsh environments. |
|---|---|
| Unthreaded Length | 00=0 inches |
| Overall Case Length | 18=1.8 inches (45.72 mm) |
| Total Length | 10=1.0 meter (39 inches) |
| Connector and Cable Type | 02=Miniature coaxial ClickLoc connector, standard cable |
| Agency Approval Option: | 05=Multiple Approvals |
| High Precision | Delivers accurate, real-time, non-contact measurements critical for machinery diagnostics. |
| Robust Design | Built to withstand tough industrial conditions. |
| Miniature Coaxial ClickLoc Connector | Ensures secure, reliable connections and easy installation. |
| Standard Cable | Facilitates straightforward integration with existing systems. |
| Manufacturer | Bently Nevada |
| Model / SKU | 330908-00-18-10-02-05 |
Ships within 24 hours | 12-Month Warranty | Worldwide Delivery
Bently Nevada 330908-00-18-10-02-05 — Why Calibration and Installation Both Matter
If you maintain rotating machinery, you already know that vibration sensors are the foundation of your condition monitoring program. Every alarm trip, every maintenance work order, every shutdown decision starts with the signal from this device. When a sensor drifts out of calibration — which happens gradually over years of thermal cycling and vibration — the monitor rack still displays numbers. The operators still make decisions. But those decisions are based on wrong data.
The Bently Nevada 330908-00-18-10-02-05 Proximity Probe is a genuine Bently Nevada sensor. Unthreaded Length: 00=0 inches; Overall Case Length: 18=1.8 inches (45.72 mm); Total Length: 10=1.0 meter (39 inches); Connector and Cable Type: 02=Miniature coaxial ClickLoc connector, standard cable. Not an aftermarket equivalent manufactured to looser tolerances — a genuine Bently Nevada unit with the manufacturer calibration certificate and holographic label intact. We verify every unit on a calibrated test bench before shipping: scale factor, linearity, and gap voltage measured against the manufacturer specification. Units that deviate from specification are not shipped. A printed test report accompanies every order.
Installation best practices: For eddy-current probes, the target surface must be clean, smooth, conductive, and at least twice the probe tip diameter. Use a calibrated gap meter to set the correct gap voltage before tightening the lock nut. Verify the output voltage at the proximitor after installation — before returning the machine to service. A probe installed with incorrect gap reports vibration amplitudes that are either dangerously low (missed faults) or falsely high (unnecessary trips). If you are replacing a failed sensor, order a spare at the same time. The cost of one spare sensor is negligible compared to one unplanned outage on a critical machine. Genuine Bently Nevada. 12-month warranty. Ships within 24 hours from Shenzhen.
Compatible Parts — Same System
These modules share the same system family as the 330908-00-18-10-02-05. Commonly ordered together for complete rack builds or spare parts kits.
Related Products
