Bently Nevada 3500/05-01-02-00-00-00 System Rack | 12/19 Inch Rack
The Bently Nevada 3500/05-01-02-00-00-00 is a system rack for Bently Nevada industrial automation platforms. Dimensions: 29.21" x 13.78" x 10.04" (740 mm x 350 mm x 255 mm) | Weight: 14.5 lbs (6.6 kg) | Operating temperature range: -40°C to 65°C (-40°F to 149°F). Factory-sealed, fully tested, 12-month warranty. Ships within 24 hours.
Technical Specifications
| 3500/05 | This indicates the series - 3500/05. |
|---|---|
| -01-02-00-00-00 | This section can vary depending on the specific configuration of the rack. However, the first digit (-01 in this case) often refers to the rack size: |
| Dimensions | 29.21" x 13.78" x 10.04" (740 mm x 350 mm x 255 mm) |
| Weight | 14.5 lbs (6.6 kg) |
| Operating temperature range | -40°C to 65°C (-40°F to 149°F) |
| Storage temperature range | -45°C to 75°C (-49°F to 167°F) |
| Humidity range | 0% to 95% RH (non-condensing) |
| EMI/RFI filtering | 50 Hz to 100 kHz |
| NEMA 4X enclosure | IP66 dust and watertight, IP67 immersion up to 1 meter for 30 minutes |
| Manufacturer | Bently Nevada |
| Model / SKU | 3500/05-01-02-00-00-00 |
Ships within 24 hours | 12-Month Warranty | Worldwide Delivery
Understanding the Bently Nevada 3500/05-01-02-00-00-00
If you maintain Bently Nevada systems, you know that not all replacement parts are created equal. The 3500/05-01-02-00-00-00 is a system rack engineered specifically for Bently Nevada automation platforms. The aftermarket is flooded with modules that look identical on the outside but use inferior components internally. 3500/05: This indicates the series - 3500/05.; dimensions: 29.21" x 13.78" x 10.04" (740 mm x 350 mm x 255 mm); weight: 14.5 lbs (6.6 kg); operating temperature range: -40°C to 65°C (-40°F to 149°F). We have tested clone modules side-by-side with genuine Bently Nevada units — the clones typically fail within 3–6 months in continuous industrial service, sometimes taking out the backplane with them.
Every 3500/05-01-02-00-00-00 we sell is 100% genuine Bently Nevada, with the manufacturer serial number and holographic label intact. We source from authorized distribution channels and decommissioned system tear-downs with full traceability documentation.
Before inserting this module, power down the chassis completely. Bently Nevada modules are generally not hot-swappable. Verify backplane voltage with a calibrated multimeter before insertion. After installation, power up and verify the status LED shows normal operation before returning the system to service. Run the manufacturer diagnostic routine if available.
Compatible Parts — Same System
These modules share the same system family as the 3500/05-01-02-00-00-00. Commonly ordered together for complete rack builds or spare parts kits.
Related Products
