Emerson EPRO CON041-CN+PR6423/00R-111-CN Eddy Current Sensor
Genuine EPRO CON041-CN+PR6423/00R-111-CN. Eddy Current Sensor. Factory-tested, 48h burn-in. 12-month warranty. Ships within 24h.
Technical Specifications
| CON041-CN | is an Eddy Current Signal Converter, paired with the |
|---|---|
| PR6423/00R-111-CN | Proximitor Sensor, providing non-contact vibration measurement. This combination ensures precise monitoring and control of machinery such as steam, gas, and hydro turbines, compressors, pumps, and fans. |
| Frequency Range | 0 to 20,000 Hz |
| Rise Time | <15 μs |
| Operating Temperature Range | -30°C to 100°C |
| Protection Class | IP66 |
| Supply Voltage Range | -23V to -32V (Output Range: -4V to -20V) |
| Housing Material | PA 6.6 |
| Weight | Approx. 100 grams (sensor with 1m cable) |
| Mounting | Din Rail |
| Connections | Screw Terminal (Max. 1.5mm², wire-end sleeves) |
| Linear Measurement Range | 2 mm (80 mils) |
| Initial Air Gap | 0.5 mm (20 mils) |
| Incremental Scale Factor (ISF) | 8 V/mm (203.2 mV/mil) ± 5% @ 0 to 45°C |
| Deviation from Best Fit Straight Line (DSL) | ± 0.025 mm (± 1 mil) @ 0 to 45°C |
| Minimum Shaft Diameter | 25 mm |
| Target Material | Ferromagnetic steel (42CrMo4) |
| Non-contact Measurement | Enables accurate and reliable vibration monitoring. |
| Rugged Design | Engineered to withstand harsh industrial conditions. |
| Wide Range of Applications | Suitable for various types of turbomachinery. |
| Long Lifespan | Built for durability and long-term use. |
| Manufacturer | EPRO |
| Model / SKU | CON041-CN+PR6423/00R-111-CN |
Ships within 24 hours | 12-Month Warranty | Worldwide Delivery
Why the EPRO CON041-CN+PR6423/00R-111-CN Matters in Your Measurement Chain
A vibration monitoring system is only as accurate as its weakest link. The Emerson EPRO CON041-CN+PR6423/00R-111-CN Eddy Current Sensor handles the critical first step — converting shaft or casing motion into a signal the monitor can interpret. CON041-CN: is an Eddy Current Signal Converter, paired with the; Frequency Range: 0 to 20,000 Hz.
Installation is just as important as the sensor itself. For eddy-current probes, the target surface must be clean, smooth, and at least twice the probe tip diameter. Use a gap meter to set the correct voltage before tightening. Verify the output at the proximitor after installation. Genuine EPRO. Calibration-verified before shipping. 12-month warranty.
Compatible Parts — Same System
These modules share the same system family as the CON041-CN+PR6423/00R-111-CN. Commonly ordered together for complete rack builds or spare parts kits.
Related Products
