EPRO

Emerson EPRO MMS 6220 Dual Channel Eccentricity Monitor

SKU: MMS 6220 In Stock
Dual Channel Eccentricity MonitorEmersonEPRO

The EPRO MMS 6220 is a dual channel eccentricity monitor for EPRO industrial automation platforms. Signal Frequency Range: 0.017 to 70 Hz (1.02 to 4200 rpm) | Minimum Range: 0 to 400 mVpeak | Maximum Range: 0 to 8000 mVpeak; any value freely selectable within this range. Factory-sealed, tested on live rack with 48-hour burn-in. 12-month warranty. Ships within 24 hours from Shenzhen.

Why the -26.7 V DC MMS 6220 Matters for Your Operation

In steel manufacturing, every component in your control system has a job to do — and when one fails, the ripple effects can shut down an entire production line. The -26.7 V DC MMS 6220 is a dual channel eccentricity monitor that keeps your rolling mill drives and continuous caster control running without interruption. Here is what you need to know before you order.

First, let us talk about what this module actually does. input impedance: ≥ 100 kOhm; input voltage range: -1 to -23 V DC; signal frequency range: 0.017 to 70 Hz (1.02 to 4200 rpm); minimum range: 0 to 400 mVpeak. These are not generic specifications — they are the parameters that determine whether this module will work in your specific -26.7 V DC system. We have seen too many cases where a maintenance team ordered a 'compatible' replacement only to find it would not communicate with their existing rack. That is why we test every MMS 6220 on a live -26.7 V DC rack before shipping — not just a visual inspection, but full signal injection across every channel.

Second, installation matters. The most common cause of DOA reports we see is not a defective module — it is bent backplane pins from forcing a module into a slot at the wrong angle. Take your time lining up the guides. Apply even pressure. If it does not slide in smoothly, stop and check the alignment. And always — always — wear a grounded wrist strap. The static discharge from removing a fleece jacket in a dry mill floor can exceed 15,000 volts, which will destroy sensitive input protection diodes before you even hear the click of the retention clips.

Third, think about your sparing strategy. A single -26.7 V DC MMS 6220 costs a fraction of what one hour of unplanned downtime costs in steel manufacturing. We ship replacements within 24 hours from our Shenzhen warehouse via DHL, FedEx, or UPS — but even 24 hours is too long if you are losing production. For critical applications, keep one cold spare on your shelf. The carrying cost is negligible compared to the alternative.

Technical Specifications

Input Impedance≥ 100 kOhm
Input Voltage Range-1 to -23 V DC
Signal Frequency Range0.017 to 70 Hz (1.02 to 4200 rpm)
Minimum Range0 to 400 mVpeak
Maximum Range0 to 8000 mVpeak; any value freely selectable within this range
Nominal Voltage-26.7 V DC
Maximum Supply Currenttyp. 20 mA; max. 35 mA
Adjustable Range1.000 to 4.999
Input Resistance≥ 30 kOhm
Pulse DurationMin. 10 µs (edge triggering)
Range0 to 10 V
Resolution10 bit
ManufacturerEPRO
Model / SKUMMS 6220
📩 Request a Quote — MMS 6220

✓ Ships within 24 hours  |  ✓ 12-Month Warranty  |  ✓ Worldwide Delivery

Category: all

Related Products

Bently Nevada 125744-01 3500/20 TMR Rack Interface Module
Bently Nevada
SKU: 125744-01
In Stock
Bently Nevada 3500/20 125760-01 Data Manager I/O Module
Bently Nevada
SKU: 125760-01
In Stock

Can't Find the Part You Need?

We source 100,000+ PLC & DCS spare parts across 20+ brands. Send us your part number and we'll get back to you within 4 hours.

Send an Inquiry →