Emerson EPRO MMS6210 Dual Channel Shaft Displacement Monitor
When a EPRO system goes down, every hour costs thousands. The MMS6210 thrust position monitor is the kind of spare part that pays for itself the first time you need it. Height: 128.4 mm (3 HE) | Length: 160.0 mm | Net Weight: 320 g. Factory-new, fully bench-tested, 12-month replacement warranty.
Technical Specifications
| PCB/EURO Card Format | Compliant with DIN 41494 standards, with dimensions of 100 x 160 mm. |
|---|---|
| Width | 30.0 mm (6 TE) |
| Height | 128.4 mm (3 HE) |
| Length | 160.0 mm |
| Net Weight | 320 g |
| Gross Weight | 450 g including standard export packing |
| Packing Volume | 2.5 dm³ |
| Space Requirements | 14 modules (28 channels) fit into each 19" rack |
| Processor | 486 DX, 33 MHz |
| Interfaces | Requires one free RS 232 interface (COM 1 or COM 2) with FIFO type 156550 UART |
| Capacity of Fixed Disk | Minimum 5 MB |
| Required Working Memory | Minimum 620 KB |
| Operating System | MS DOS Version 6.22 or higher, or Windows 95/98 or NT 4.0 |
| Manufacturer | EPRO |
| Model / SKU | MMS6210 |
Ships within 24 hours | 12-Month Warranty | Worldwide Delivery
Understanding the EPRO MMS6210
If you maintain EPRO systems, you know that not all replacement parts are created equal. The MMS6210 is a thrust position monitor engineered specifically for EPRO automation platforms. The aftermarket is flooded with modules that look identical on the outside but use inferior components internally. pcb/euro card format: Compliant with DIN 41494 standards, with dimensions of 100 x 160 mm.; width: 30.0 mm (6 TE); height: 128.4 mm (3 HE); length: 160.0 mm. We have tested clone modules side-by-side with genuine EPRO units — the clones typically fail within 3–6 months in continuous industrial service, sometimes taking out the backplane with them.
Every MMS6210 we sell is 100% genuine EPRO, with the manufacturer serial number and holographic label intact. We source from authorized distribution channels and decommissioned system tear-downs with full traceability documentation.
Before inserting this module, power down the chassis completely. EPRO modules are generally not hot-swappable. Verify backplane voltage with a calibrated multimeter before insertion. After installation, power up and verify the status LED shows normal operation before returning the system to service. Run the manufacturer diagnostic routine if available.
Compatible Parts — Same System
These modules share the same system family as the MMS6210. Commonly ordered together for complete rack builds or spare parts kits.
Related Products
