Fuji Electric NP1L-RS3 Communication Module For Komori PLC Module
A Fuji Electric NP1L-RS3 — the communication module you wish you had on the shelf when the old one fails. Transmission Speed: 1200 to 115200 bps | Data Format: 7 or 8 bits, 1 or 2 stop bits, odd or even parity | Dimensions: 90 x 59 x 30 mm. Physical stock, not virtual. Ships within 24 hours with printed test report.
Technical Specifications
| Communication Ports | 2x RS-232C, 1x RS-485 |
|---|---|
| Communication Protocols | Modbus RTU, ASCII, DNP3, FL-net |
| Transmission Speed | 1200 to 115200 bps |
| Data Format | 7 or 8 bits, 1 or 2 stop bits, odd or even parity |
| Dimensions | 90 x 59 x 30 mm |
| Weight | 0.1 kg |
| Manufacturer | Fuji Electric |
| Model / SKU | NP1L-RS3 |
Ships within 24 hours | 12-Month Warranty | Worldwide Delivery
Understanding the Fuji Electric NP1L-RS3
If you maintain Fuji Electric systems, you know that not all replacement parts are created equal. The NP1L-RS3 is a communication module engineered specifically for Fuji Electric automation platforms. The aftermarket is flooded with modules that look identical on the outside but use inferior components internally. communication ports: 2x RS-232C, 1x RS-485; communication protocols: Modbus RTU, ASCII, DNP3, FL-net; transmission speed: 1200 to 115200 bps; data format: 7 or 8 bits, 1 or 2 stop bits, odd or even parity. We have tested clone modules side-by-side with genuine Fuji Electric units — the clones typically fail within 3–6 months in continuous industrial service, sometimes taking out the backplane with them.
Every NP1L-RS3 we sell is 100% genuine Fuji Electric, with the manufacturer serial number and holographic label intact. We source from authorized distribution channels and decommissioned system tear-downs with full traceability documentation.
Before inserting this module, power down the chassis completely. Fuji Electric modules are generally not hot-swappable. Verify backplane voltage with a calibrated multimeter before insertion. After installation, power up and verify the status LED shows normal operation before returning the system to service. Run the manufacturer diagnostic routine if available.
Compatible Parts — Same System
These modules share the same system family as the NP1L-RS3. Commonly ordered together for complete rack builds or spare parts kits.
Related Products
