HIMA | F2 DO 8 01 | HIMatrix | Safety-related Controller | 100% Genuine
The HIMA F2-DO-8-01 — a himatrix safety-related controller you will wish you had on the shelf when the old one fails. Current Input: Max. 0.6 A | Electrical Isolation of the Channels: None | Back-up Battery: Not specified. Physical stock, not virtual inventory. Ships within 24 hours.
Technical Specifications
| Response Time (Ethernet Interfaces) | ≥ 20 ms |
|---|---|
| Ethernet Interfaces | 2 x RJ-45, 10BASE-T/100BASE-Tx with integrated switch |
| Current Input | Max. 0.6 A |
| Electrical Isolation of the Channels | None |
| Back-up Battery | Not specified |
| Operating Temperature | 0...+60 °C |
| Storage Temperature | -40...+85 °C |
| Type of Protection | IP20 |
| Weight | 1.3 kg |
| Number of Channels | 8 potential-free normally open contacts |
| Switching Voltage | ≥ 5 V, ≤ 250 VAC / 250 VDC |
| Contact Material | Silver alloy (AgNi) |
| Switching Time | Approx. 30 ms |
| Reset Time | Approx. 10 ms |
| Bounce Time | Approx. 15 ms |
| Manufacturer | HIMA |
| Model / SKU | F2-DO-8-01 |
Ships within 24 hours | 12-Month Warranty | Worldwide Delivery
Why the HIMA F2-DO-8-01 Matters for Your Operation
In water treatment, every component in your control system has a specific job — and when one fails, the ripple effects can shut down an entire production line. The HIMA F2-DO-8-01 is a himatrix safety-related controller that keeps your municipal water pumping and filtration control running without interruption.
Here is what this module actually does. response time (ethernet interfaces): ≥ 20 ms; ethernet interfaces: 2 x RJ-45, 10BASE-T/100BASE-Tx with integrated switch; current input: Max. 0.6 A; electrical isolation of the channels: None. These are not generic specifications — they determine whether this module will work in your specific HIMA system. We have seen too many cases where a maintenance team ordered a replacement only to find it was the wrong revision or configuration. That is why we test every F2-DO-8-01 on a live HIMA rack before shipping — full signal injection across every channel, not just a visual check.
Installation matters too. The most common cause of DOA reports is not a defective module — it is bent backplane pins from forcing a module in at the wrong angle. Take your time lining up the guides. Apply even pressure. If it does not slide in smoothly, stop and check the alignment. Always wear a grounded wrist strap — static discharge from removing a fleece jacket in a dry treatment facility can exceed 15,000 volts, destroying sensitive input protection diodes instantly.
Think about your sparing strategy. A single HIMA F2-DO-8-01 costs a fraction of what one hour of unplanned downtime costs in water treatment. We ship replacements within 24 hours from Shenzhen — but even 24 hours is too long if you are losing production. For critical applications, keep one cold spare on your shelf.
Compatible Parts — Same System
These modules share the same system family as the F2-DO-8-01. Commonly ordered together for complete rack builds or spare parts kits.
Related Products
