Schneider BMXSDO0802 Discrete Output Module - Topbrands PLC Limited
Technical Specifications
| Topbrands | PLC Limited |
|---|---|
| In stock | 1000 left |
| Range of Product | Modicon X80 |
| Product Type | Discrete Output Module |
| Number of Outputs | 8 (Conforming to EN/IEC 61131-2) |
| Output Type | Solid State (Not Isolated) |
| Output Logic | Positive |
| Discrete Output Voltage | 24V DC (Range: 19–30V DC) |
| Discrete Output Current | 0.5 A |
| Output Compatibility | : |
| Current per Channel | 0.625 A |
| Maximum Current per Module | 10 A |
| Maximum Leakage Current | 0.5 mA (State 0) |
| Maximum Voltage Drop | < 1.2V (State 1) |
| Insulation Resistance | > 10 MΩ (500V DC) |
| Power Dissipation | 4.4 W |
| Response Time on Output | 1.2 ms |
| Paralleling of Outputs | Yes (Maximum 2) |
| Typical Current Consumption | : |
| MTBF Reliability | 383,000 hours |
| Protection Types | : |
| Output Overload Protection | : |
| Output Overvoltage Protection | With Transil Diode |
| Output Short-Circuit Protection | With 2A External Fuse |
| Reverse Polarity Protection | Reverse Mounted Diode |
| Voltage Detection Threshold | : |
| Maximum Tungsten Load | 6 W |
| Switching Frequency | 0.5/LI² Hz |
| Load Impedance (Ohmic) | ≥ 48 Ω |
| Status LEDs | : |
| Product Weight | 0.12 kg |
| IP Degree of Protection | IP20 |
| Gas Resistance | Class Gx |
| Corrosion Resistance | Class 3C4 |
| Dust & Sand Resistance | Class 3S4 |
| Salt Resistance | Level 2 |
| Mold & Fungal Resistance | Class 3B2 |
| Dielectric Strength | : |
| Vibration Resistance | 3 gn |
| Shock Resistance | 15 gn |
| Storage Temperature | -40 to 85°C |
| Operating Temperature | -25 to 60°C |
| Relative Humidity | 5–95% at 55°C (Non-condensing) |
| Protective Treatment | Conformal Coating |
| Operating Altitude | : |
| Related Tags: |
Ships within 24 hours | 12-Month Warranty | Worldwide Delivery
Schneider BMXSDO0802 Discrete Output Module - Topbrands PLC Limited
Making the Case for a Tested schneider
The difference between a module that has been visually inspected and one that has been functionally tested is not academic — it's the difference between a spare that works when you need it and one that doesn't. In our testing lab, approximately 15-20% of Schneider modules that arrive looking cosmetically perfect exhibit some form of functional anomaly when powered on: a channel that's slightly out of calibration, a communication port that drops packets under load, or a power supply section that can't maintain regulation at maximum rated draw. These are the failures that visual inspection cannot catch.
The Schneider BMXSDO0802 Discrete Output Module - Topbrands PLC Limited is one of those modules where functional testing matters most. Part number: schneider. With Topbrands: PLC Limited, In stock: 1000 left, Range of Product: Modicon X80, every parameter must be verified under power to confirm the module meets its original specifications. Our four-phase test protocol — live-rack power-up, calibrated signal injection, communication bus verification, and 48-hour thermal burn-in at 55°C — is designed to catch failures before they reach your facility.
Every schneider ships with a serial-numbered test report documenting the results of all four test phases. This report provides auditable evidence of the module's condition, which is valuable for ISO-certified facilities and regulated industries where maintenance documentation is subject to audit.
Compatible Parts — Same System
These modules share the same system family as the BMXSDO0802 Discrete. Commonly ordered together for complete rack builds or spare parts kits.
Related Products
